3D printer – Big Builder Dual-Feed (White Edition with led lights)
This is our older 3D printer, it is diffucult to use and is not recommended for beginners. It is a tall printer so only in special cases we recommend using this printer.
https://builder3dprinters.com/product/builder-premium-large-white/
How to setup
From Software Builder Original Builder 3D Printers B.V. Retrieved 29 September 2021
- Download Cura software and select Cura 3.2 (64 bit)
- After installing Cura, select Custom machine and name it Big Builder Dual-Feed White.
- Enter the sizes of your Builder:
X (Width) = 220 mm Y (Depth) = 210 mm Z (Height) = 660 mm Check heated bed and change the gantry height to 1 mm.
- Download the INI-files for your Builder 3D printer
- Load the INI-files in Cura by using the option “import” in Preferences → Configuring Cura → Profiles AND Activate this profile (Big_Builder_dual_V02).
- For more information about Cura, check the manual.
How to print something
- Create a model (e.g. via thingyverse, tinkercad, freecad, etc.)
- Save as stl, gcode, or any format Cura understands
- Load in cura
- Enter the SD card into your laptop.
- In the print setup menu, select Generate Support and Build plate adhesion when necessary.
- Save to the SD Card.
- Make sure that the bed has a sufficient amount of tape.
- Put some adhesive (Glue Stick) on the bed (Roughly where your model will be).
- Turn on the 3D printer
- Heat the bed to 60 degrees (Heating takes about 10 minutes) and Pre-heat the 3d Printer to 210 degrees.
- Insert the SD card and print your file from it.